Blazing Splices - Multiple Quantities

Snap-Locking Waterproof Connectors with Pre-Filled Silicone
(Formerly known as SNAPLOC^TM Low-Voltage Wire Connectors.)

Superior Performance When it Counts Snap-Locking connectors eliminate common install problems:

• Best low-voltage connections for underground dog fences, landscape lighting, irrigation & more...
• 100% Waterproof
• Quick, compact and easy!

  Locks Tight with Double O-Ring Seals

  Just squeeze and lock to hydraulically pump and pack waterproofing silicone.

  Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires. Blazing Wire Connectors^TM are vibration-proof and never dangle off the wires.

  Say Goodbye to Traditional Connector Problems- Eliminate Expensive Call-Backs Because of Faulty Wiring

  
  Professionals generally check the wiring first when examining a faulty pet containment system because traditional connectors regularly fail to maintain the connection and protect it from moisture and corrosion. Blazing Wire Connectors^TM are the solution - They're the economical connectors that make the connection first and seal it second.
  
  "A poor wire connection will always lead to an expensive and time-consuming call back. A call back takes time and money out of your pocket... Unlike ordinary twist-on wire connectors that traditionally cause gaps into which moisture can enter and accumulate, Snaploc wire connectors are 100-percent water resistant."
  --Tech Times, Official quarterly of Irrigator Technical Training School, CA ("Snaploc...Innovation at Its Best!", Fall 2001)

  Blazing Wire Connectors^TM Installation Instructions
  (Formerly known as SNAPLOC^TM Low-Voltage Wire Connectors.)

  Additional Tools Required: None.

  For use with solid or stranded wire, 18AWG to 24AWG

  Maximum 30 volts - 10 amps.

  Minimum 2 #24 AWG - Maximum 5 #18 AWG

  This item ships within 24 hours of payment. (excluding weekends and holidays)

  • Locking - Never loosens or dangles off wires
  • Foolproof - Never fails to grab the wires
  • Easy - Compact 5-second installation
  • No Mess - Silicone encapsulates connection and will not melt out
  • No Tunneling Effect - No channel for moisture to follow into the connection
  • Vibration Proof - Connection stays secure
    1. Strip wires 3/4" and group bare wire ends together. No pre-twisting necessary with solid wire. Pre-twist stranded wire. If using both wire types, wrap stranded wire around solid wires (see illustration 1A).
    2. Insert wires through flexible sealing fingers and bend wires into either "V-Channel".
    3. Push inner sleeve into pre-filled outer sleeve until double-locked. Pre-filled silicone fully waterproofs the connection. Do not reuse connector.

Blazing Wire Connectors are the low-voltage wire connectors designed for the professional pet fence installer. Unlike twist-on connectors, you never have to doubt the connection of your dog fence boundary wire.